Quantitative characterization of endothelial cell morphologies depending on shear stress in different blood vessels of domestic pigs using a focused ion beam and high resolution scanning electron microscopy (FIB-SEM).

Abstract

Microstructured surfaces mimicking the endothelial cell (EC) morphology is a new approach to improve the blood compatibility of synthetic vascular grafts. The ECs are capable of changing their shapes depending on different shear conditions. However, the quantitative correlation between EC morphology and shear stress has not yet been investigated statistically. The aim of this study was to quantitatively investigate the morphology of ECs in dependence on the shear stress. Blood flow rates in different types of natural blood vessels (carotid, renal, hepatic and iliac arteries) originated from domestic pigs were first measured in vivo to calculate the shear stresses. The EC morphologies were quantitatively characterized ex vivo by imaging with high resolution scanning electron microscopy (SEM) and cross-sectioning of the cells using a state-of-the-art focused ion beam (FIB). The relationships between EC geometrical parameters and shear stress were statistically analyzed and found to be exponential. ECs under high shear stress conditions had a longer length and narrower width, i.e. a higher aspect ratio, while the cell height was smaller compared to low shear conditions. Based on these results, suitable and valid geometrical parameters of microstructures mimicking EC can be derived for various shear conditions in synthetic vascular grafts to optimize blood compatibility.