Abstract
AbstractThe spectral resolving power R = λ/δλ is a key property of any spectrograph, but its definition is vague because the ‘smallest resolvable wavelength difference’ δλ does not have a consistent definition. Often, the FWHM is used, but this is not consistent when comparing the resolution of instruments with different forms of spectral line-spread function. Here, two methods for calculating resolving power on a consistent scale are given. The first method is based on the principle that two spectral lines are just resolved when the mutual disturbance in fitting the fluxes of the lines reaches a threshold (here equal to that of sinc2 profiles at the Rayleigh criterion). The second criterion assumes that two spectrographs have equal resolving powers if the wavelength error in fitting a narrow spectral line is the same in each case (given equal signal flux and noise power). The two criteria give similar results and give rise to scaling factors that can be applied to bring resolving power calculated using the FWHM on to a consistent scale. The differences among commonly encountered line-spread functions are substantial, with a Lorentzian profile (as produced by an imaging Fabry–Perot interferometer) being a factor of two worse than the boxy profile from a projected circle (as produced by integration across the spatial dimension of a multi-mode fibre) when both have the same FWHM. The projected circle has a larger FWHM than its true resolution, so using FWHM to characterise the resolution of a spectrograph which is fed by multi-mode fibres significantly underestimates its true resolving power if it has small aberrations and a well-sampled profile.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callMore From: Publications of the Astronomical Society of Australia
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
