Abstract
Mining of base and precious metal deposits by open pit methods normally results in the removal of significant volumes of waste rock in order to access the ore. The extracted waste rock is commonly placed in an out-of-pit waste rock storage facility (RSF). Modern environmental legislation requires mine waste rock storages to be designed and engineered to contain and isolate the reactive waste rock, to minimise release of acid and metal drainage. During the mine’s life, operating conditions change in response to falling metal prices, higher operating costs, better knowledge of the deposit, change of mine ownership and change or loss of key staff. With these changes, the method of construction of the RSF may need to be modified from the accepted design at commencement of mining. In the absence of construction details, RSFs can be decommissioned using incorrect and inappropriate cover design and water management, resulting in prolonged poor-quality seepage. In such instances, regulatory authorities are becoming increasingly reluctant to accept mine lease relinquishment and release of bond money. Effective closure and rehabilitation of an RSF containing reactive waste rock, typically sulphidic rock, requires an understanding of how it was constructed and where the different waste units, including the reactive waste rock, have been placed. Often the current mine plan is incomplete or insufficient, and knowledge of the construction method for the RSF is not retained by current mining staff. It is, however, possible to identify the makeup or ‘anatomy’ of the RSF using historical mine-generated data to facilitate effective closure of the facility, without resorting to extensive drilling programs. This paper is a case study of three out-of-pit RSFs from a large base metal mine where the construction details were temporarily lost to the current mine operators. The authors were able to collect and collate available data for every year of the mine life, totalling more than 15 years. These data were then assessed using spatial analysis and mine planning software packages to build a model of each RSF that defined and quantified the distribution of reactive and benign waste rock for the 15 years of mine life. The assessment identified where reactive sulphidic waste rock had been placed within each RSF for each year of operation. The existence and extent of reactive waste rock exposed on outer RSF batters and beneath the outer batter slopes were defined. The exposure and duration of exposure of reactive waste rock was also defined to identify potential ‘reaction cells’ with the RSFs that may require specific remediation and management to facilitate closure. The outcome of the study is a better understanding of waste rock type distribution within each RSF. This can be used to enhance closure planning and define final earthworks to contain and mitigate reactive waste rock.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have