Quantification of uncertainty of experimental measurement in leaching test on cement-based materials

Abstract

Listen

Translate article

When mineral wastes are reused in construction materials, a current practice is to evaluate their environmental impact using standard leaching test. However, due to the uncertainty of the measurement, it is usually quite difficult to estimate the pollutant potential compared to other materials or threshold limits. The aim of this paper is to give a quantitative evaluation of the uncertainty of leachate concentrations of cement-based materials, as a function of the number of test performed. The relative standard deviations and relative confidence intervals are determined using experimental data in order to give a global evaluation of the uncertainty of leachate concentrations (determination of total relative standard deviation). Various combinations were realized in order to point out the origin of large dispersion of the results (determination of relative standard deviation linked to analytical measured and to leaching procedure), generalisation was suggested and the results were compared to literature. An actual example was given about the introduction of residue (meat and bone meal bottom ash – MBM-BA) in mortar, leaching tests were carried out on various samples with and without residue MBM-BA. In conclusion large dispersion were observed and mainly due to heterogeneity of materials. So heightened attention needed to analyse leaching result on cement-based materials and further more other tests (e.g. ecotoxicology) should be performed to evaluate the environmental effect of these materials.