Abstract

Resveratrol is one of representative ingredient in red wine, but its quantification is a challenge because of a complex and abundant matrix. In this study, two sample pretreatments, direct dilution and QuEChERS extraction, coupling LCMS analysis were examined for resveratrol quantification. Similar recoveries of 106.4 to 93.7% were obtained for direct dilution and QuEChERS, respectively. With the aid of condition optimization, QuEChERS extraction could concentrate the resveratrol from red wines to improve the detection sensitivity with a LOD value of 2.5 ng/mL, which is four-times greater than the direct dilution approach. As a result, the QuEChERS method can provide a high linearity within the concentration range of 5 - 500 ng/mL, in which direct dilution produced the linear calibration curve within the concentrations of 25 - 500 ng/mL. A high consistency was obtained for both approaches in which intra-day precisions were within 0.5 to 7.2% (n = 3), and the inter-day precisions were within 7.8 to 16.0% (n = 9). Overall, the sample pretreatment of QuEChERS can effectively reduce the matrix effect, which leads LCMS to quantify the low resveratrol abundance of 8.0 ppb in each red wine sample, which is not achieved with the direct dilution approach.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.