Abstract
The blend of butadiene and acrylonitrile copolymer (NBR) with natural poly-cis-isoprene (NR) shows increased resistance to swelling in solvents in comparison to the individual components. In aerospace, NBR rubber is used as thermal protection for rockets and shall not contain other polymers, even in low contents, otherwise, it can affect the protection performance and rocket safety by causing detachment of the elastomer/propellant interface; therefore, this investigation presents methodologies to determine the NR/NBR contents. This study explores different analytical techniques, such as Raman spectroscopy and Fourier transform infrared (FTIR) spectroscopy, in the mid-infrared (MIR) by reflection and in the near-infrared by reflectance (NIRA) modes, Furthermore, quantification strategies by univariate, bivariate and multivariate (chemometric) models are evaluated and compared. A proposed methodology, based on multivariate Raman microscopy with partial least squares regression (PLS), showed high linearity (R2 > 0.99) and low error (< 0.82 %). The validation of FT-MIR data for the CH3, which presented lower error (1.3%) than vinylidene band (6%), showed that both methodologies (reflection and NIRA reflectance) can be used for the quantification of NR in NR/NBR. These results constitute a contribution to the state of the art in researching industrial and aerospace elastomeric applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have