Abstract
Strontium (Sr) and sodium (Na) are the most used modifiers in the aluminum casting industry. Both lose their concentration (fade) during holding in the melting furnace. Three types of chemical reactions in the melt may cause modifier fading: vaporizing, oxidizing, or reacting with some other elements from the melt. Due to Na and Sr’s very low vapor pressure, their vaporization from the aluminum melt was excluded as a reason for the modifiers’ fading. Oxidation looks like the major chemical reaction that causes the fading of Na and Sr from an aluminum melt. The present paper aimed to quantify the fading of Na and Sr in an Al–Si–Cu–Mg alloy. The loss of modifiers (Na and Sr) during melt holding in a furnace can be analytically quantified using equations taken from the literature. The calculated surface reaction rate constant (ks) can estimate the modifier’s loss during melt holding in industrial and laboratory furnaces.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.