Quantification of Heavy Metals from A.M.D. Discharged into a Public Water Supply Dam in the Iberian Pyrite Belt (SW Spain) Using Centered Moving Average

Abstract

In this work, the determination of moving averages is proposed as a method for quantifying metal, arsenic, and sulfate discharges into a water course undergoing acid mine drainage processes which flows into a public water supply dam in the Iberian Pyrite Belt. The analysis of the results obtained by applying moving averages shows that the highest metal and sulfate concentrations occur in October, coinciding with the first rainfall and the sponging of mine dumps, with November and December being the months when the highest contributions to the Andevalo Dam take place. The discharge of acid mine waters with its corresponding metal load into the Andevalo Dam means, for a single hydrological year, more than 6,000 t of sulfates, almost 600 t of iron, and 1 t of As, of special relevance for the hydrochemical quality of the stored waters. When they arrive at the dam, these metals precipitate, since the water pH is near 7, and remain latent in the bottom sediment as long as the chemical makeup of the dam water does not change.