Abstract
A simple and accurate method based on solid-phase extraction (SPE), transesterification and gas chromatography–mass spectrometry (GC–MS) was developed for the quantitative analysis of free and esterified sterols of olive oil. In order to achieve better separation of esterified and free sterols, silica and alumina SPE adsorbents were tested. Separations by silica provided more reproducible results. The transesterification of both sterol fractions was found to be more user friendly than saponification as a method to liberate the sterols from the respective esters. The free sterols were then silylated with N, O-bis-trimethylsilyltrifluoroacetamide (BSTFA) with 1% of trimethylchlorosilane (TMCS). The most favourable conditions for exploitation of this reagent were established. The optimized methodology was suitable for evaluation of free and esterified sterols in Protected Designation of Origin (PDO) olive oils and monovarietal olive oils with different maturation indices. The prevailing phytosterols in all olive oils were β-sitosterol and campesterol. The free sterols predominated, although they seemed to decrease with the maturation of the olive fruits.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.