Quantification of Fly Ash in Concrete by Image Analysis Techniques: a Preliminary Investigation

Abstract

ABSTRACTThe fly ash present in concrete mixtures is readily identified with qualitative electron microscope techniques. Quantification of the fly ash present in samples is more difficult. Visual analysis of a representative sample volume can be accomplished in a reasonable amount of time through use of image analysis techniques.Our research efforts have focused on the development of an image analysis technique which uses particle shape and composition to quantify the fly ash present in samples. The resultant binary image is filtered to eliminate the smallest particles and pieces of particles. Shape factor analysis distinguishes spherical fly ash particles from irregularly shaped grains of unhydrated cement clinker. The volume percent of nearly spherical particles is calculated and adjusted to compare the percentage of spherical particles in the matrix of fly ash-containing specimens to the percentage in a control specimen with no fly ash.There is a 2.2-fold increase in the number of spherical particles associated with the substitution of Portland cement by 60 wt% fly ash. Proportional changes in this ratio should be observable in samples with varying amounts of fly ash. The most obvious limitation of the method is related to the requirement that one knows the percentage of high atomic number particles in the fly ash beforehand.