Qualitative and quantitative anatomical characteristics and radial variation of major cell components in Paulownia tomentosa wood grown in Korea

Abstract

Qualitative and quantitative anatomical characteristics and radial variations of the major cell components in Paulownia tomentosa wood were examined using optical microscopy and X-ray diffraction to aid in wood identification and as quality indices. The vessel arrangement on the transverse surface was either ring-porous or semi-ring-porous. Most vessels had solitary pores, while some vessels had multiple radial pores. The axial parenchyma was generally confluent and partially of aliform type. Tyloses with high frequency in the vessel lumen and multiseriate rays (2 to 5 cells) were typical. The vessel diameter of earlywood and latewood was approximately 240 and 107 μm, respectively, with a range of 165 to 289 μm in earlywood and 55 to 149 μm in latewood. Ray height and fiber length were approximately 178 and 740 μm, respectively. The vessel diameter in both earlywood and latewood and the fiber length increased gradually with an increasing number of growth rings. Ray height was constant from the pith to the middle section and decreased toward the bark. The anatomical characteristics and radial variation of major components of P. tomentosa can be used as wood identification keys and quality indices.