Abstract
We demonstrate a Q-switched Erbium-doped fiber laser (EDFL) with a tunable output wavelength using Nickel oxide (NiO) saturable absorber (SA) in conjunction with a Sagnac loop mirror (SLM) filter. The proposed SA was prepared by embedding NiO nanoparticles obtained bysimplistic sonochemical reaction into polyethylene oxide (PEO). The NiO PEO film was integrated into a figure-of-eight resonator configured with a SLM to generate Q-switched pulses with a tunable output wavelength. As the SLM temperature was increased from 30 °C to 70 °C, the laser operation can be tuned from 1551.9 nm to 1544.1 nm. At 1551.9 nm operation, the repetition rate rose from 36.2 kHz to 40.3 kHz and the pulse duration reduced from 10.00 to 9.32 μs when the pump power rose from 131.5 to 161.0 mW. At the highest pump power of 161.0 mW, the maximum output power and pulse energy were obtained at 0.67 mW and 16.6 nJ. For Q-switched operation at 1544.1 nm, the produced Q-switched pulse exhibited a pulse duration of 8.88 μs, the repetition rate of 45.7 kHz, the highest output power of 0.60 mW and pulse energy of 13.1 nJ at the maximum pump power of 161.0 mW.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.