QoS Provisioning in a Scalable Wireless Mesh Network for Intelligent Transportation Systems

Abstract

The wireless mesh network (WMN) is an economical low-power solution to provide wireless broadband access in intelligent transportation systems (ITSs). This paper investigates how to deploy access points (APs) to improve throughput and quality-of-service (QoS), when the multihop communication is used to extend the coverage of wireless ITS network. Frequency planning is suggested to improve the capacity with QoS provisioning and to make the system more scalable. To investigate the overall tradeoffs among QoS, throughput, and coverage, we develop an analytical model to evaluate throughput, frame delay, and jitter for the considered ITS WMN using the carrier-sense multiple-access (CSMA) medium access control (MAC) protocol. Then, we apply an optimization approach to determine the optimal separation distances between APs with the delay requirement. To provide a guideline for network planning, we compare the uniform-spacing and increasing-spacing AP deployment strategies. The uniform-spacing strategy is to make all the APs with the same separation distance. In the increasing-spacing strategy, the separation distances between APs are increased from the central AP to the outer APs. Because of the shorter separation distance, the AP closer to the central AP can deliver higher traffic. It is shown that the increasing-spacing strategy outperforms the uniform-spacing strategy in terms and a profit function, considering the capacity and the total cost for deploying APs.