Abstract
Wireless Body Area Network (WBAN) consists of a number of sensor nodes that are attached to the human body, and intended for monitor the human body condition. The WBAN system has several wireless communication modules that are used for sending or exchanging data between sensor nodes and gateway nodes or gateway nodes. There are some factors that are used to decide which communication modules should be implemented on WBAN system, including communication efficiency, distance range, power consumption, and the effect of mobility on QoS. In this study, we analyze the impact of the kinematic movement of sensor nodes on QoS parameter of HC-05 Bluetooth and NRF25L01 communication modules, during sending and receiving process among nodes. We assume that the sensor node and gateway node are attached on the limbs to catch the movement. We use Quality of Service (QoS) parameters such as delay, jitter, and packet loss, to analyze the impact of movement on communication modules. Based on the experimental result, it was found that the average value of delay and jitter for booth communication modules was slightly influenced by the speed of the sensor node movement. During the sensor node movement and data transmission, we found that the NRF24L01 module have a lower delay and jitter value than Bluetooth HC-05 module. The percentage of packet loss tends to be stable at 0% value, even though the speed value becomes higher.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have