Abstract
Combustion characteristics of neat biomass fast-pyrolysis oil were studied in a horizontal combustion chamber with a rectangular cross-section. An air-assisted externally mixed nozzle known to successfully atomize heavy fuel oils was installed in a modified 100 kW (350 000 BTU/h nominal capacity) burner to explore full utility for pyrolysis oil (bio-oil) combustion in a furnace. Combustion experiments were conducted at air/fuel equivalence ratios of 0.46, 0.53, and 0.68 (116, 88, and 47% excess air, respectively) and compared to diesel fuel flames (control) at the two higher air/fuel equivalence ratios. In these experiments, the fuel flow rate was maintained at a constant energy input (equivalent of 24 kWth). The results revealed that, while the externally mixed nozzle could effectively atomize and ensure stable combustion of neat bio-oil at the set heat rate, this comes with a penalty associated with a lower peak flame temperature and, hence, heat flux. The formation of carbon monoxide (CO) decreases wit...
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have