Abstract
Thermal and catalytic pyrolysis of various types of lignin and their influence on the yield and the quality of the produced lignin oil were studied. Lignins originated from a mixture of pine and spruce wood (softwood), a mixture of birch and aspen wood (hardwood) and Eucalyptus Urograndis. High degree of deoxygenation of the bio-oil and maximum yield of value-added chemicals were the main targets of this work. 2DGC-ToFMS analysis was used for the qualitative and quantitative characterization of the lignin oils. Softwood lignin was found to be the most attractive feedstock and high yields of a mixture of phenolic compounds were detected in all cases. High char production was also evident for all types of lignins accounting for almost 50% of the original feedstock. The use of a commercial ZSM-5 catalyst was extremely beneficial for the process, enhancing deoxygenation at higher oil yields compared to thermal pyrolysis. Depending on the nature of the lignin, guaiacyl or syringyl groups were dominant in the oils and it was found that process optimization, involving lignin, catalyst selection and temperature could significantly improve the process efficiency.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.