Pyroelectric ultrasound sensor model

Abstract

Ultrasound is typically measured using phase-sensitive piezoelectric sensors. Interest in phase-insensitive sensors has grown recently, with proposed applications in ultrasound attenuation tomography of the breast. The advantage of phase-insensitive imaging is that it does not suffer from degradation of image quality due to phase-aberration and narrow directional response. A numerical model of a phase-insensitive pyroelectric ultrasound sensor is presented. The model consists of three coupled components run in sequence: acoustic, thermal, and electrical. The acoustic simulation models the propagation and absorption of the incoming ultrasound wave. The negative divergence of the time-averaged acoustic intensity is used as a heat source in the thermal simulation for the time-evolution of temperature in the sensor. Both the acoustic and thermal simulations are performed using the k-Wave MATLAB toolbox with an assumption that shear waves are not supported in the medium. The final component of the model uses a pyroelectric circuit model which outputs the sensor response based on the temperature change in the sensor. The modelled pyroelectric sensor response and directional dependence are compared to empirical data. A physical model for the directionality of the sensor response is then proposed.