PVA/CMC/PEG blended polymer loaded with ZnCo1.9Al0.1O4/carbon nanoparticles/PANi as a promising films for UV radiation shielding

Abstract

Polyvinyl alcohol (PVA), carboxymethyl cellulose (CMC) and polyethylene glycol (PEG) have been employed as polymeric matrices for the synthesis of polymeric nanocomposite films that incorporate ZnCo1.9Al0.1O4, carbon nanoparticles (CNPs) and polyaniline (PANI) as fillers. X-ray diffraction technique was utilized to examine the structure of ZnCo1.9Al0.1O4 filler and the formed PVA/CMC/PEG/ZnCo1.9Al0.1O4/CNPs/x wt % PANi blends. The morphology of the doped blend was explored using the scanning electron microscopy technique. The increases in absorbance, especially in the UV spectrum, demonstrate the potential of these blends in UV-blocking and UV-filtering applications. The minimum direct and direct optical energy gaps are 5.62 and 4.77 eV obtained as the quantity of PANi became 0.3 wt %. The highest refractive index values (n = 1.66 at 600 nm) were acquired as the blend was doped with 0.4 wt % PANi. The impact of different fillers on the linear and nonlinear optical parameters was explored. The inclusion of ZnCo1.9Al0.1O4/CNPs/x wt % PANi resulted in an improvement in PVA/CMC/PEG blended polymer's optical conductivity. The FL intensities of the loaded blends are comparatively lower than those of the undoped blend. The values of the dielectric constants of doped blends with x = 0 or 0.4 are notably higher than those of other blends. Doped blend with x = 0.2 exhibited the highest energy density value (9 × 10−3 J/m3 at 1 kHz). The doped blend with x = 0.4 has the highest ac conductivity (1.53 × 10−8 Sm−1 at 1 kHz). The influence of doping on the relaxation time and capacitance behavior of the host blend was inspected. These outcomes suggest the opportunity of employing the created nanocomposites in capacitive energy storage and optoelectronic devices.