Abstract

In this paper, a comparative performance analysis was proposed for PV fed EV charging system for ZETA and SEPIC DC-DC converter topologies. The utilization of Electric vehicles has gained significance in recent years due to societal awareness and increasing concern for environmental sustainability. EV charging time plays a vital role in modern-day vehicle commuting with energy-efficient performance. The selection of an appropriate DC-DC converter topology plays a significant role for fast charging with improved efficiency. The paper presents an optimized parameter selection, design, simulation methodology & relative performance analysis between the ZETA and SEPIC converter topologies with and without MPPT algorithm for EV charging applications. The MPPT algorithm based on P&O and IC techniques investigates for switching time of the ZETA and SEPIC converters under standard test conditions of solar PV panel i.e., at irradiance of 1000 W/m2 and temperature of 25oC. In this article MATLAB/Simulink was developed to explore the performance of both topologies with and without MPPT approaches for battery SoC, battery voltage and charging current. The study shows that the battery charged from an SoC of 50% to 50.035% for SEPIC converter while the ZETA converter charges from 50% to 50.025% with a similar simulation time of ten seconds with Solar power input. The results demonstrate the DC-DC SEPIC converter is the best choice for EV charging applications through the PV system.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call