Pushover Analysis of G+3 Reinforced Concrete Building with soft storey

Abstract

Many urban multistorey buildings in India today have open first storey as an unavoidable feature. This is primarily being adopted to accommodate parking or reception lobbies in the first storey. This paper highlights the importance of explicitly recognizing the presence of the open first storey in the analysis of the building and also for immediate measures to prevent the indiscriminate use of soft first storeys in buildings. Alternate measures, involving stiffness balance of the open first storey and the storey above, are proposed to reduce the irregularity introduced by the open first storey. The structural engineering profession has been using the nonlinear static procedure (NSP) or pushover analysis. Modeling for such analysis requires the determination of the nonlinear properties of each component in the structure, quantified by strength and deformation capacities, which depend on the modeling assumptions. Pushover analysis is carried out for either user-defined nonlinear hinge properties or default-hinge properties, available in some programs based on the FEMA-356 and ATC-40 guidelines. This paper aims to evaluate the zone -II selected reinforced concrete building to conduct the non-linear static analysis (Pushover Analysis). The pushover analysis shows the pushover curves, capacity spectrum, plastic hinges and performance level of the building. This non-linear static analysis gives better understanding and more accurate seismic performance of buildings of the damage or failure element.