Pulsed Laser Deposition of Epitaxial ZnSxSe1-x Thin Films for Waveguiding Applications in Mid-IR Active Multilayered Structures

Abstract

ABSTRACTChromium doped II-VI semiconductors (such as ZnSe and ZnS) feature broad mid-IR emission in the 2-3 μm spectral range due to intershell transitions of the Cr2+ions. These materials show much promise for development of a tunable, electrically-pumped, mid-IR laser source. For integration into a mid-IR active multilayered structure, the ternary alloy ZnSxSe1-xis an attractive waveguiding material due to its lattice-matching ability and lower index of refraction with respect to the Cr2+:ZnSe active material. Epitaxial growth of each layer is desired to achieve the electronic and optical properties necessary for successful integration into a lasing device, so a study was conducted on the effects of sulfur content and growth temperature on the crystal quality of the resulting thin films. Several films of ZnSxSe1-xwere deposited by pulsed laser deposition (PLD) using a 248 nm KrF excimer laser source at varying growth temperatures and with various compositional parameters onto (100) GaAs substrates. The samples were analyzed via x-ray diffraction (XRD) and energy dispersive x-rays (EDX) to investigate the crystal quality and elemental content of the films for device integration. Film-substrate epitaxy was achieved and upper bounds to the defect density were calculated for several regimes of compositional parameter and growth temperature. From all samples produced, the lowest defect density of 2.2 x 1010cm-2was observed for the x=0.06 film grown at 450°C, while the lowest lattice mismatch between the substrate and epilayer of 0.059% was observed for the x=0.02 film grown at 450°C.