Abstract

AbstractPulsed field losses in a short sample (445 mm length) of 46‐kA Nb3Sn cable‐in‐conduit conductor of superconducting magnet for the fusion experimental reactor “ITER” are measured by a calorimetric method. The coupling time constant between strands is obtained as 30 ms through pulsed loss. Based on this time constant and interstrand conductance measurement, it is expected that there is a coupling current loop length of about 400 mm, which is longer than half the fabrication twist pitch in the fourth cabling stage. A geometrical calculation on several‐stage cabling shows this value to be reasonable. © 2003 Wiley Periodicals, Inc. Electr Eng Jpn, 142(4): 27–33, 2003; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/eej.10088

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.