Pulsed electrodeposition of carbon nanotubes-hydroxyapatite nanocomposites for carbon/carbon composites

Abstract

Carbon nanotubes-hydroxyapatite (CNTs-HA) composite coatings, which behaved like single composites, were synthesized by a combined method composed of electrophoretic deposition and pulsed electrodeposition. The phase compositions and the microstructure of the composite coatings were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Fourier transform infrared spectrometry (FTIR). Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) studies showed that the CNTs-HA composite coatings protected the bare carbon/carbon composites from corrosion in simulated body fluid (SBF) solution. The adhesion strength of CNTs-HA composite coating prepared by the combined method is 14.57±1.06MPa achieved at the CNTs EPD time of 10min. Compared to the other CNTs-HA composite coatings with different content of CNTs, the CNT-HA composite coating with the electrophoretic deposition of 10min showed the best corrosion resistance. The morphology of CNTs-HA composite coatings immersed in SBF solution rendered the formation of HA crystallites. In addition, in vitro cellular responses to the CNTs-HA composite coatings were assessed to investigate the proliferation and morphology of mouse cells 3T3 cell line.