Pulsed chronopotentiometric membrane electrodes based on plasticized poly(vinyl chloride) with covalently bound ferrocene functionalities as solid contact transducer

Abstract

Ion-selective membrane materials based on poly(vinyl chloride) (PVC)-containing covalently attached redox-active ferrocene (Fc) groups are characterized here as all-solid-state pulsed voltammetric ion sensors. The redox capacity of the membrane increases 7-fold with a doubling of the Fc content and 3-fold with the addition of 10 wt % of the lipophilic electrolyte ETH 500, tetradodecylammonium tetrakis(4-chlorophenyl)borate. This salt improves the ionic conductivity of the membrane and appears to make the Fc groups electrochemically more accessible. A too high content of the two, on the other hand, was found to cause undesired sensitivity to redox-active species present in the sample solution. Dilution of the membrane with a plasticizer eliminated this redox sensitivity while preserving its high redox capacity. A practical application of the designed electrodes in electrochemical analysis was demonstrated with a multi-pulse protocol that includes a current-controlled ion uptake pulse, followed by an open-circuit potential (OCP) measurement and a regeneration pulse. Potentiometric calibration curves obtained with this protocol exhibited a linear response with near-Nernstian slopes for acetate, nitrate, chloride, and perchlorate ions with the selectivity expected for an ion-exchanging membrane.