Pulse length dependence of a reactive high power impulse magnetron (HiPIMS) discharge

Abstract

The pulse length dependence of a reactive high power impulse magnetron sputtering (HiPIMS) discharge with a tungsten cathode in an argon+oxygen gas mixture gas was investigated. The HiPIMS discharge is operated with a variable pulse length of 20–500 µs. Discharge current measurements, optical emission spectroscopy of neutral Ar, O, and W lines, and energy-resolved ion mass spectrometry are employed. A pronounced dependence of the discharge current on pulse length is noted while the initial discharge voltage is maintained constant. Energy-resolved mass spectrometry shows that the oxygen-to-tungsten (O+/W+) and the tungsten oxide-to-tungsten (WO+/W+) ion ratio decreases with pulse length due to target cleaning. Simulation results employing the SDTrimSP program show the formation of a non-stoichiometric sub-surface compound layer of oxygen which depends on the impinging ion composition and thus on the pulse length.