Abstract
AbstractThis paper describes the discharge characteristics of a needle/dielectric composite electrode in N2 gas produced by a rectangular pulse voltage. Glass or ZnO was placed in contact with the needle for the needle–plane electrode configuration. In the case of glass in contact with the needle, the discharge voltage increased with increasing L (the distance from the tip of the needle to the dielectric). In the case of ZnO in contact with the needle, the discharge voltage increased with increasing L from 0 mm to 2 mm, but it gradually decreased with increasing L from 2 mm to 10 mm. It is considered that these differences in the discharge voltage characteristics originate from the corona extension process and discharge path. © 2001 Scripta Technica, Electr Eng Jpn, 137(1): 1–8, 2001
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.