Abstract
Pullout tests on single and double soil nails were conducted in a model sandbox. The test parameters included variations in the surface roughness, the ratio of nail length to nail diameter, the overburden pressure, and the distance between two nails. The characteristic of a single asperity, the asperity number per unit length, and the ratio of the thread depth to the soil particle size were used to define the surface roughness factor. The test results showed that the apparent friction coefficients at the soilnail interface were dependent upon the surface roughness of the nail. Group efficiency was used to evaluate the effectiveness of a nail when installed within a group. The test results showed that the group efficiency of a double-nail system was dependent upon the surface roughness factor and has a linear relationship with the nail distance until 100% efficiency is reached. The minimum required distance for 100% efficiency also varied with the surface roughness factor.Key words: apparent friction coefficient, group efficiency, pullout test, surface roughness factor.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
