PtRu Nanofilm Formation by Electrochemical Atomic Layer Deposition (E-ALD)

Abstract

The high CO tolerance of PtRu electrocatalysis, compared with pure Pt and other Pt-based alloys, makes it interesting as an anode material in proton exchange membrane fuel cells (PEMFC) and direct methanol fuel cells (DMFC). This report describes the formation of bimetallic PtRu nanofilms using the electrochemical form of atomic layer deposition (E-ALD). Metal nanofilm formation using E-ALD is facilitated by use of surface-limited redox replacement (SLRR), where an atomic layer (AL) of a sacrificial metal is first formed by UPD. The AL is then spontaneously exchanged for a more noble metal at the open-circuit potential (OCP). In the present study, PtRu nanofilms were formed using SLRR for Pt and Ru, and Pb UPD was used to form the sacrificial layers. The PtRu E-ALD cycle consisted of Pb UPD at -0.19 V, followed by replacement using Pt(IV) ions at OCP, rinsing with blank, then Pb UPD at -0.19 V, followed by replacement using Ru(III) ions at OCP. PtRu nanofilm thickness was controlled by the number of times the cycle was repeated. PtRu nanofilms with atomic proportions of 70/30, 82/18, and 50/50 Pt/Ru were formed on Au on glass slides using related E-ALD cycles. The charge for Pb UPD and changes in the OCP during replacement were monitored during the deposition process. The PtRu films were then characterized by CO adsorption and electrooxidation to determine their overpotentials. The 50/50 PtRu nanofilms displayed the lowest CO electrooxidation overpotentials as well as the highest currents, compared with the other alloy compositions, pure Pt, and pure Ru. In addition, CO electrooxidation studies of the terminating AL on the 50/50 PtRu nanostructured alloy were investigated by deposition of one or two SLRR of Pt, Ru, or PtRu on top.