Abstract

This paper presents an implementation of quarter wavelength single-shorted coupled-lines for narrow bandpass filter application. It is shown as a new way of creating a single resonance bandpass filter by inter-connected of two <br /> single-shorted quarter wavelength coupled-line sections. By adding more single-shorted coupled-line into the configuration, the form of halfwavelength resonator can increase the degree of order of the filter. For the design of 4<sup>th</sup> order resonator, the coupledlines are arranged inter-connected to each other forming five-fingers lines layout. Due to the interconnection of the coupledlines, transmission zeros appear at the two stopbands which improves the selectivity of the filter response. Investigation on the parametric of the 4<sup>th</sup> order resonator is conducted to observe the controlling parameters and it’s realiability responses of the resonator. For compactness, five-fingers meandered lines is proposed. It is found that the size of the meandered lines resonator was successfully reduced by 33% compared to the five-fingers straight lines resonator of the same order. For validation of concept, the 4<sup>th</sup> order meandered lines resonator was designed at 1 GHz and fabricated on RO3210 microstrip substrate with characteristics given as h = 1.27 mm, Ɛr = 10.2 and tan δ = 3x10<sup>-3</sup>. The measurement results show good agreement with the simulation results.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.