Prototype RF cavity for the HISTRAP accelerator

Abstract

HISTRAP, a proposed synchrotron-cooling-storage ring designed to both accelerate and decelerate very highly charged very heavy ions for atomic physics research, requires an RF accelerating system to provide +or-2.5 kV of peak accelerating voltage per turn while tuning through a 13.5:1 frequency range in a fraction of a second. A prototype half-wave, single-gap RF cavity with biased ferrite tuning was built and tested over a continuous tuning range of 200 kHz through 2.7 MHz. Initial test results establish the feasibility of using ferrite tuning at the required RF power levels. The resonant system is located entirely outside of the accelerator's 15-cm-ID beam line vacuum enclosure except for a single RF window which serves as an accelerating gap. Physical separation of the cavity and the beam line permits in situ vacuum baking of the beam line at 300 degrees C. >