Abstract
A non-integrated type noise filter on a Coplanar Waveguide (CPW) transmission line is demonstrated by using a highly resistive Co₄₁Fe₃?Al₁₃O? nanogranular thin film with the dimensions of 4 ㎜(l) × 4 ㎜(w) × 0.1㎛ (t). The noise suppression characteristics are evaluated without placing an insulating layer between the CPW line and the magnetic thin film. The insertion loss is very low being less than 0.3 ㏈ and this low value is maintained up to 2 ㎓. At a ferromagnetic resonance frequency of 3.3 ㎓, the power loss is very large and the degree of noise attenuation is measured to be 3 ㏈. This level of noise attenuation is still small for real applications; however, considering the small magnetic volume used in this work, further improvement is expected by simply increasing the magnetic volume and by integrating the magnetic thin film into the CPW transmission line.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have