Prototype Design for Grading Structures in Powder Bed Fusion Processes.

Abstract

While targeted alignment in certain additive manufacturing (AM) methods such as material extrusion (MEX) and stereolithography (SLA) has been well documented in the research community, a method for targeted alignment of added fillers or fibrous materials in powder bed fusion (PBF) AM devices has yet to be successfully achieved. Similarly, incorporation of multimaterials does not work easily with any of the AM technologies. This study creates a prototype design that could be integrated into a PBF system to allow for multimaterial layer deposition and alignment of powders and powder blends. The rheological properties of polyamide powder and a range of polyamide composite blends (incorporating milled carbon fibre, graphite flakes, polytetrafluoroethylene, and glass microspheres) in different concentrations were studied, and together with the particle size distribution and particle morphology analysis were applied for the design of a prototype hopper for incorporation in the PBF system to create targeted multimaterial deposition. Different concept designs, multichambered and multi-hopper with hopper angles calculated specifically for the composite blend powders selected, were proposed. Initial deposition trials outside a PBF process were tested, and the deposited layers were measured.