Abstract
Based on work undertaken over 30 years ago, most Australian winemakers use a heat test (80oC for six hours) to check white wines for protein stability. Some winemakers consider that this test is too severe, resulting in wines being over-fined with bentonite. This paper presents the results of a study comparing the predictive ability of this test, assessed either by eye, by nephelometry or by optical density, with that of two alternative assays (80oC for 2 hours and the Bentotest), through the use of storage trials of 8 wines designed to mimic commercial conditions of transport and storage of wine. One of the 8 unfined wines failed to develop haze even under the more severe storage conditions of this study (35oC for a month or fluctuating between 20oC and 35oC for 8 days) and only 6 of the 8 unfined wines developed haze under ‘best practice’ storage conditions (13oC–17oC for 16 months). All the wines fined with bentonite at dosage rates determined by the three predictive tests used in the main part of this work remained bright in bottle after storage trials at 13oC–17oC for 16 months, 35oC for 1 month or fluctuating between 20oC and 35oC for 8 days. Therefore the least severe stability test, heating at 80oC for 2 hours, which generally indicated lower dosage rates in this study, accurately predicted short to medium term stability for these wines under these storage conditions.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
