Abstract
Abstract Ce-based conversion coatings (CeCCs) are a promising alternative to toxic chromate coatings on the metal substrates. In this work the CeCCs were electrodeposited on aluminium alloy AA6060 from aqueous solution of Ce(NO3)3 at different potentials (−0.95 V, −1.2 V and −1.4 V). Effect of deposition potential and post-treatment in the phosphate solution on morphology and protective properties of CeCCs with top cataphoretic epoxy coating was studied. To assess the differences between the protective systems, originating from the different CeCCs pre-treatments, electrochemical impedance spectroscopy (EIS), polarization measurements, AFM and SEM/EDS analysis were used. The EIS study was undertaken to follow the evolution of corrosion behaviour of epoxy coating/CeCCs protective systems over prolonged time of exposure to the chloride environment (3 wt.% NaCl). Results suggest significantly improved corrosion stability of epoxy coating on AA6060 with as-deposited CeCCs sub-layers with respect to the same epoxy coatings with phosphate post-treated CeCCs. The far best protective properties, i.e., the greatest value of pore resistance and the lowest value of corrosion current density were provided by the epoxy coating/CeCC protective system with CeCC deposited at −1.2 V and without post-treatment.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
