Abstract
A two-layer TiAl/TiAlN coating was deposited by High Power Impulse Magnetron Sputtering on the surface of three TiAl intermetallic alloys for improving their oxidation resistance. The effectiveness of the surface coatings was tested in a facility designed for simulating the service conditions of turbine engines components. The response of uncoated and coated samples was compared during thermal cycling up to 1000 °C under oxidizing environment. The growth of oxide layers and the degradation of the coatings were investigated by X-ray Diffraction, Scanning Electron Microscopy, Energy Dispersive X-ray Spectroscopy and X-ray Photoelectron Spectroscopy. The surface coating was found to greatly improve the oxidation resistance of Ti-47Al-2Cr-8Nb and Ti-43.5Al-4Nb-1Mo alloys, while more limited benefits were observed for the Ti-48Al-2Nb-0.7Cr-0.3Si alloy. The different performance of the same coating deposited on different substrates has been tentatively attributed to the different alloying elements present in the intermetallic substrate, and that can diffuse towards the protective coating and the growing oxide layer.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
