Abstract
The use of field emission cathodes in X-ray tubes requires the placement of the cathode assembly with a small gap from the anode, and this hampers the output of radiation. The greatest difficulties arise in the generation of a relatively soft spectrum with wavelengths of 1–10 nm: in this case, the accelerating voltage does not exceed several kilovolts and the interelectrode gap does not exceed several hundred microns. In this work, the possibility of using submicron films based on beryllium as through-type anodes for emitting the BeKα line (λ = 11.4 nm) and the accompanying bremsstrahlung spectrum is experimentally demonstrated. In particular, the characteristic radiation of a tube with a field emission blade-type cathode and a Be-film anode, introduced into a grazing incidence grating spectrometer, was detected. The characteristics of beryllium films necessary for designing high-power X-ray tubes of this type are determined.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.