Prospective Respiratory Gated Carbon Nanotube Micro Computed Tomography

Abstract

Challenges remain in the imaging of the lungs of free-breathing mice. Although computed tomographic (CT) imaging is near optimal from a contrast perspective, the rapid respiration rate, limited temporal resolution, and inflexible x-ray pulse control of most micro-CT scanners limit their utility in pulmonary imaging. Carbon nanotubes (CNTs) have permitted the development of field emission cathodes, with rapid switching and precise pulse control. The goal of this study was to explore the utility of a CNT-based micro-CT system for application in quantitative pulmonary imaging. Twelve CB57/B6 mice were imaged during peak inspiration and end-exhalation using the CNT micro-CT system. The respiratory trace was derived from a sensor placed underneath the abdomen of the animal. Animals were allowed to breathe freely during the imaging under isoflurane anesthesia. Images were reconstructed using isotropic voxels of 77-μm resolution (50 kVp, 400 projections, 30-ms x-ray pulse). Lung volumes were measured with region-growing techniques and thresholds derived from the surrounding air and soft tissues. Basic functional parameters, including tidal volume, functional reserve capacity and minute volume, were also calculated. The average scan time was 13.4 ± 1.8 minutes for each phase of the respiratory cycle. Mean lung volumes at peak inspiration and end-expiration were 0.23 ± 0.026 and 0.11 ± 0.024 mL, respectively. The average minute volume was 11.93 ± 2.64 mL/min. The results of this study demonstrate the utility of a CNT-based micro-CT system in acquiring prospectively gated images from free-breathing mice for obtaining physiologic data. This technique provides an alternative to breath-hold techniques requiring intubation and offers greater dose efficiency than retrospective gating techniques.