Abstract
IntroductionDiagnostic reference levels (DRLs) are intended to improve patient safety and ensure that patient ionizing radiation doses are as low as reasonably achievable. The purpose of this dosimetry study was to establish regional DRL levels for cone-beam computed tomography (CBCT) imaging for specialty endodontics. Another aim was to compare phantom-measured ionizing radiation dose index 1 (DI1) index doses to the manufacturer-provided dose area product (DAP) radiation output values for each of the CBCT machines studied, to ascertain their degree of correlation. DAP refers to the dose area product, a measure of radiation dose monitoring which represents the dose within the beam times the area within the beam at that position. MethodsA thimble ionization chamber and polymethyl methacrylate phantom were used to obtain DI1 values using the SEDENTEXTCT method from 21 different CBCT units. DRLs were calculated based on the 75th percentile (third quartile) of the median output values. ResultsThe proposed DRL from the CBCT units surveyed has a DAP value of 838 mGy cm2 and a DI1 value of 3.924 mGy. DAP versus DI1 values of 500.6 mGy cm2 versus 2.006 mGy, and 838 mGy cm2 versus 3.906 mGy represented the third quartile of the median values for the 4-cm × 4-cm and 5-cm × 5-cm field of views (FOVs), respectively. ConclusionsThe DI1 and DAP values strongly correlated when 3 outlier CBCT machines (J Morita Veraview X800) using a novel 360° (full rotation) acquisition mode were excluded. The importance of selectable exposure parameters as directly related to ionizing radiation output is illustrated among the CBCT units surveyed. Although the actual FOV that is selected is ultimately dictated by the specific clinical requirements, a 4-cm × 4-cm FOV is recommended for specialist endodontics practice, whenever clinically practical, based on the decreased ionizing radiation output, as compared to that from a 5-cm × 5-cm FOV.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.