Abstract
Twelve Marx generators, with a total stored energy of 26.4 MJ and a diode voltage of 10 or 5 MV, supply the energy to diodes to extract proton beams. A combination of two types of diodes is used. One diode type is insulated by the radial magnetic field and extracts the rotating ring beam. The other type is the ordinary magnetically insulated one, from which the proton beam fills the inner hollow part of the rotating beam. The argon gas filling the reactor cavity neutralizes the charge of the proton beams, but does not neutralize the current of the beams. The proton beam pinches to a small radius by the azimuthal magnetic field, and its propagation is stabilized by the axial magnetic field. The cryogenic 6-mm-radius hollow shell target consists of three layers of lead, aluminum, and deuterium-tritium fuel. The target is imposed by a biased voltage of −1 MV in order to focus the proton beams on the target surface. The ion temperature and pR of the fuel after the target implosion reach 4.2 keVand 7.0 g/cm2, respectively. Thus the 2.5-GJ output energy is released from a target. The reactor is an ADLIB type, which consists of an inner rotating cylinder and an outer fixed cylinder. Inside the inner rotating cylinder, the Flibe flows, acting as coolant and tritium breeder. The net plant efficiency is expected to be 33%, and the 800-MW(electric) net power can be supplied from one reactor with a 1-Hz operation frequency.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.