Property Analysis of Slag Composite Concrete Using a Kinetic–Thermodynamic Hydration Model

Abstract

Slag is increasingly unitized for the production of sustainable concrete. This paper presents a procedure with which to analyze the property development of slag composite concrete. Experimental studies of the hydration heat and compressive strength development and simulation studies using a kinetic hydration model and a thermodynamic model were performed. First, we performed an experimental study of the isothermal hydration heat of cement–slag blends. Based on the results of the experimental study on cumulative hydration heat, the reaction degree of slag was determined. We found that the reaction degree of slag decreased as the slag content increased. Second, the reaction degree of slag and cement were used as the input parameters for the Gibbs energy minimization (GEM) thermodynamic equilibrium model. Moreover, the phase assemblage of hydrating cement–slag was determined. The trends of calcium silicate hydrate (CSH) are similar to those of strength. Based on the CSH content, the strength of hardening cement–slag blends was determined. In addition, the calcium hydroxide (CH) content resulting from the thermodynamic model shows good agreement with the experimental results. In summary, the integrated kinetic–thermodynamic model is useful for analyzing the properties of cement–slag blends.