Abstract
The surface morphology, microstructure and transport properties of epitaxial YBa/sub 2/Cu/sub 3/O/sub 7/ and PrBa/sub 2/Cu/sub 3/O/sub 7/ thin films and heterostructures deposited on slightly vicinal substrates of SrTiO/sub 3/ by high pressure oxygen sputtering were studied. The vicinal angles of the substrates and bicrystals were less then 13/spl deg/. Depending on the tilt angle of the substrate a transition from spiral or island to step-flow growth leading to an improvement of the surface roughness was observed. Atomic force and transmission electron microscopy were used for these investigations. Furthermore, electrical and structural properties of YBa/sub 2/Cu/sub 3/O/sub 7/ thin films on vicinal offcut SrTiO/sub 3/ bicrystals with different grain boundary types were studied. This included junctions with a 2/spl times/12/spl deg/ tilt or twist of the YBa/sub 2/Cu/sub 3/O/sub 7/ c-axis across the grain boundary. In comparison to conventional [001]-tilt grain boundaries bicrystal Josephson junctions [100]-tilt grain boundaries showed high I/sub c/R/sub n/-products of up to 1.2 meV at 77 K and up to 8 meV at 4.2 K. IV-curve instabilities, probably of magnetic origin due to flux flow in the electrodes, often could be observed for junctions biased with high current densities.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.