Abstract
The paper presents results of an experimental investigation carried out to study the properties of plain concrete and steel fibre reinforced concrete (SFRC) containing fibres of mixed aspect ratio. An experimental programme was planned in which various tests such as inverted cone time, Vebe time and compaction factor were conducted to investigate the properties of plain concrete and fibre reinforced concrete in the fresh state. Compressive strength, split tensile and static flexural strength tests were conducted to investigate the properties of concrete in the hardened state. The specimen incorporated three different volume fractions, i.e., 1.0%, 1.5% and 2.0% of corrugated steel fibres and each volume fraction incorporated mixed steel fibres of size 0.6 × 2.0 × 25 mm and 0.6 × 2.0 × 50 mm in different proportions by weight. Complete load deflection curves under static flexural loads were obtained and the flexural toughness indices were obtained by ASTM C-1018 as well as JCI method. A fibre combination of 65% 50 mm + 35% 25 mm long fibres can be adjudged as the most appropriate combination to be employed in SFRC for compressive strength, split tensile strength and flexural strength. However, better workability was obtained as the percentage of shorter fibres increased in the concrete mix.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
