Abstract
Mullite and cordierite based refractory ceramic materials were produced from formulations based on an industrial Al-rich sludge derived from the wastewater treatment of the aluminium anodising process. Some common ceramic raw materials, like ball clay, kaolin, diatomite and talc, were also added. Cylindrical samples processed by uniaxial dry pressing were sintered at different temperatures (between 1300 and 1650 °C, 1 h soak at each temperature) to study the ceramic properties. The fired properties of materials was evaluated (firing shrinkage, water absorption, bending strength, thermal expansion coefficient, refractoriness and SEM microstructure) and demonstrated that optimal properties were obtained at 1650 °C for mullite and 1350 °C for cordierite.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
