Abstract
Aggregate size and its source are crucial for concrete properties. This paper presents the evaluation of the properties of self-compacting concrete (SCC) which mixed with coarse aggregate from different sources. Coarse aggregate from three sources which are commonly available in Vientiane Capital, Mekong River (MK), Ngum River (NG) and Crushed Mountain Stone (MT) were used for this study. Six different mixed proportions with two maximum aggregate size 19mm and 12.5mm for each aggregate source were prepared. Ordinary Portland Cement Type I and Fly ash class C were used as binders. The replacement ratio of fly ash to cement was fixed at 20% and w/p ratio was 0.36. Sika Viscocrete-3180MR was used as water reducing admixture with 0.95% by weight of binders. The results show that, for the fresh concrete properties, the coarse aggregate with maximum size of 12.5mm from Mekong River is the most suitable aggregate comparing to other sources. For the hardened concrete with 28-day curing, the highest compressive strength is the mixed proportion MK12 for aggregate size 12.5mm. As seen, the coarse aggregate with 12.5mm of Mekong River is the most appropriate aggregate among three sources which has a flow-ability and higher compressive strength.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.