Abstract
The effect of pH on the physical and mechanical properties of a sediment was investigated through a set of experimental tests. The sediment was formed from deposition of suspended particles in a fluid. Two different types of clay soil were suspended in fluids with different pH (2, 4, 7, 9 and 11) in cylindrical tubes with volume of 1 liter and also in special cylindrical reservoirs. The height of the sediment was measured in the cylindrical tube until equilibrium was achieved. The sediment deposited in the reservoirs was dried in air and then Atterberg limit, compaction and unconfined compressive strength (UCS) tests were conducted on samples prepared from each sediment. The results showed that the final height of the settled sediment is a function of pH; the height of sediment is increased with increasing the pH. Also, the Atterberg limits increased with increasing the pH. The maximum dry unit weight and optimum water content decreased and increased with increasing the pH. The final strength of the sediment decreased with increasing pH. Based on the SEM analysis, it was found that the values of pH influence the properties of the formed sediments.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
