Abstract
In this work, fused deposition modeling (FDM) technology was used to prepare poly(lactic acid)/walnut shell/hydroxyapatite (PLA/WS/HA) composite filaments. HA was treated with silane and characterized by Fourier transform infrared spectroscopy (FTIR). The composites were investigated by using simultaneous thermal analyzer, scanning electron microscopy (SEM) and a universal mechanical testing machine. The results showed that incorporating either HA or WS improved the thermal stability and water absorption of PLA, but lowered the tensile and compression strength. Fillers toughened the PLA matrix, resulting in higher tensile elongation and compressive strain. The tensile and compressive strengths of samples significantly dropped after water-immersion for 6 weeks. Finally, scaffolds were manufactured by using FDM. The compression modulus and structural feature of scaffolds indicated that the PLA/WS/HA composites have the potential to be applied in structural parts, such as bone implants.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
