Abstract
Thermally modified birch (Betula pendula Roth) veneers that had been subjected to wood treatment technology (WTT) or thermo vacuum (TV) processes were compared in this study. After modification of veneers in the range of temperatures from 160 °C to 218 °C and times from 0.5 h to 3 h, the color, mass loss, density, tensile strength, hygroscopicity, and decay resistance against brown rot fungus Coniophora puteana were determined. Treatment regimes with the greatest mass loss were at 217 °C for 3.0 h in TV (7.8%) and 160 °C for 0.8 h in the WTT (6.7%). As expected, wood mass loss correlated well with moisture exclusion efficiency (MEE) in all relative humidity (RH) environments (r = 0.95 to 0.99). Strength loss in the WTT was considerable compared to the TV process (57% and 40%, respectively). The resistance against brown rot fungus was moderate with a mass loss of 12% to 33%. Among the investigated samples, the regime 217/3.0/TV showed the best resistance against brown rot fungus and acceptable other properties.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callSimilar Papers
More From: BioResources
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
