Abstract
This study examined properties of four composite veneering materials polymerized with two different photo-curing units for the purpose of evaluating curing performance of the combination of composite material and curing unit. Two microfilled (Dentacolor and Thermoresin LC II) and two hybrid (Cesead II and Solidex) composite materials designed for prosthetic veneer were selected. The respective light sources of the units were a xenon (Dentacolor XS) and a metal halide (Hyper L II) lamp. The composite materials were exposed with the photo-curing unit for 60 s on each side (i.e. from top and bottom). Knoop hardness, compressive strength, flexural strength, flexural modulus, water absorption and water solubility were determined according to standardized testing methods. The specimens exposed with the metal halide unit generally exhibited greater Knoop hardness number, and compressive strength and lower solubility than those exposed with the xenon unit. A microfilled material (Thermoresin LC II) cured with the metal halide unit exhibited significantly improved results for all tests as compared with the same material cured with the xenon unit.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
