Properties and structure of PVP–lignin “blend films”

Abstract

AbstractBlend films of poly (4‐vinylpyridine) and lignin were prepared by the casting method. Their structure and properties were studied by Fourier transform infrared (FTIR), wide‐angle X‐ray diffraction (WXRD), scanning electron microscopy (SEM), thermogravimetric analysis (TG), and differential scanning calorimetry (DSC). The IR spectra of the blend films indicated that hydrogen‐bonding interaction occurred between poly (4‐vinylpyridine) and lignin. The glass transition temperature of these blends increased with the increase of lignin content, which indicated that these blends were able to form a miscible phase due to the formation of intermolecular hydrogen bonding between the hydroxyl of lignin and the pyridine ring of poly (4‐vinylpyridine). The thermostability of these blends decreased with the increase of lignin content. Initially, an appreciable increase in the measured tensile strength was achieved with a lignin content of 15%, at which the maximum value of 33.03 MPa tensile strength was reached. At a 10% lignin incorporation level, the blend film exhibited a maximum value of 9.03% strain. When the threshold in lignin content for blend films exceeded that limit of 10% lignin, the strain behavior of these blend films deteriorated. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 95: 1405–1411, 2005