Properties and Performance of Oil Well Slurry and Cement Sheath Incorporating Nano Silica: A Review.

Abstract

The oil well cementing job is the operation in which a cement paste is pumped to fill the annulus behind the casing. Inclusion of nanomaterials in oil well cement results in improving the cement properties. This paper provides a comprehensive overview of incorporating nanosilica into oil well cement, addressing various aspects of the nanosilica manufacturing process, dispersion challenges, the impact on cement hydration and properties, as well as the operational challenges. The addition of nanosilica is found to enhance cement properties such as hydration rate, compressive strength at low temperatures, and resistance to deterioration at high temperatures. However, challenges arise, including increased viscosity and the need for higher water content. Dispersion of nanosilica into cement slurry remains a difficulty, compounded by the high manufacturing cost, limiting its practical application. The paper recommends further research to improve nanosilica dispersion, explore cost-effective raw materials, and overcome operational challenges for broader utilization in oil well cementing.